Skip to main content

Volume Converter

This volume converter changes an already-known volume into another unit. Enter the quantity, select its source unit and choose the target unit. US liquid, Imperial and US customary cooking units are labeled separately.

How to convert volume units

Volume measures the space something occupies. A unit conversion expresses that same space with a different number and unit. Enter a liquid quantity or another known volume, choose the unit on the original measurement, then choose the target unit. The main result gives that target quantity; the details show the factor and other supported equivalents.

Apply the factor ratio

Target quantity = source quantity × source factor ÷ target factor. Both factors express one unit in cubic meters, so their cubic-meter units cancel. Multiplication first expresses the source quantity on a common scale; division counts how many target units fit that same volume. NIST volume and length definitions supply the unit basis.

Liters and milliliters

Multiply liters by 1000 to get milliliters. To convert mL to liters, divide by 1000. The milli prefix means a thousandth, so smaller units require a larger count for the same volume. NIST SI prefixes and the liter definition establish this relationship.

Liters and labeled gallons

First choose US liquid or Imperial gallons. Divide liters by 3.785411784 for US liquid gallons, or by 4.54609 for Imperial gallons. In reverse, multiply the labeled gallon quantity by its liters-per-gallon factor. These factors follow the NIST exact unit definitions and customary volume relationships.

Cubic units and capacity

A meter contains 10 decimeters along each axis. A cubic meter therefore contains 10 × 10 × 10 = 1000 . A liter is one cubic decimeter, so 1 equals 1000 , not 1 . Volume conversion cubes a length factor because it scales all three perpendicular directions. NIST prefixes and the liter definition explain the scale. Converting cubic volume to liters expresses a capacity only when the starting volume describes usable internal space. It cannot determine wall thickness, headspace or how objects pack into a container.

Choose the correct volume unit

The symbol mL means milliliters. The label cc means cubic centimeters, written cm³; 1 = 1 . Cubic feet and cubic yards use the international foot and yard. The NIST liter and cubic-unit relationship connects the metric choices.

A US liquid gallon is 3.785411784 . An Imperial gallon is 4.54609 . Neither equals 4 , and 16 is not one gallon in either system: 16 ≈ 4.22675283773037 ; 16 ≈ 3.5195079727854 . Choose the convention stated by the original source instead of treating a bare gallon label as sufficient. NIST gallon definitions distinguish the systems.

Cooking choices use US customary measuring units. One equals 8 , or 16 . One US customary tablespoon equals 3 . These relationships come from the exact customary rows in NIST Handbook 44, Appendix C; the adjacent rounded milliliter equivalents are not used as exact factors. Metric cooking measures and nutrition-label conventions are outside this menu. Check the recipe's convention before selecting a unit.

A bare oz label is ambiguous. Fluid ounces measure volume; mass ounces require a different calculation. Four US fluid ounces equal 118.29411825 , while four Imperial fluid ounces equal 113.65225 . Neither is 100 . Choose the explicitly labeled fluid-ounce unit when the measurement is a volume. NIST customary volume relationships define the two systems.

Check common volume conversions

For 2.5 , choose liters as the source and milliliters as the target.

2.5 × 1000 = 2500 .

For the liters-to-US-liquid-gallons pair, 1 ≈ 0.264172052358148 . The approximation mark identifies a shortened result. For the cubic-meters-to-liters pair, 1 = 1000 . Pair shortcuts change the units while keeping the entered quantity. Swap reverses the selected units and also keeps that quantity; it does not replace it with the previous result. Clear empties the quantity and keeps the selected units.

Read the result and avoid unit mix-ups

The conversion uses exact unit definitions and the entered decimal quantity. Results show up to 15 significant digits, with unnecessary trailing zeros removed. The ≈ mark identifies a shortened value. Very small and very large results use scientific notation, so an accepted nonzero quantity stays distinguishable from zero. Copy retains the full round-trip numeric result and its target unit, which can contain more digits than the displayed result. Extra digits do not improve the accuracy of the original measurement.

Zero is valid. Enter a nonnegative decimal quantity; scientific notation also works when typed or pasted. Fraction syntax, missing quantities and unsupported unit names are not accepted. Extremely small nonzero inputs or results with insufficient supported precision, and values above the numeric range, return an explicit error. Optional equivalents outside that range are omitted even when the selected target result is valid.

If you have shape dimensions instead of a known volume, the Volume Calculator computes the volume first. Square units describe area; the Area Converter changes those units without inventing a depth. A volume conversion cannot determine mass, a partial tank fill or safe container capacity. For a known concrete volume, the Concrete Weight Calculator also needs an independently chosen density for the material.

If you have tank dimensions and a liquid-level reading instead of an already-known quantity, the Tank Volume Calculator estimates the liquid volume first. Return here when that quantity needs a different volume unit.

When a known mass accompanies the volume, the Density Calculator combines both measurements to find density. It can also find mass from a supplied density and volume. Keep the converted volume and its unit together, and use measurements for the same sample.

Converting fuel volume alone does not give fuel economy. When that volume is the actual fuel consumed over a measured distance, the Fuel Economy Calculator combines both quantities and keeps US liquid and Imperial gallons distinct.

Volume conversion reference table

Each row converts one source unit to liters. Use the explicitly named convention when comparing a measurement or recipe.

Source unitEquivalent in liters
1 (mm³)0.000001
1 (cm³, cc)0.001
1 (dm³)1
1 (m³)1000
1 (mL)0.001
1 (L)1
1 (kL)1000
1 (in³)0.016387064
1 (ft³)28.316846592
1 (yd³)764.554857984
1 3.785411784
1 0.946352946
1 0.473176473
1 0.0295735295625
1 4.54609
1 1.1365225
1 0.56826125
1 0.0284130625
1 0.2365882365
1 0.01478676478125
1 0.00492892159375

Values use the same definitions and display precision as the calculator. An approximation mark means the displayed value is shortened. The references below document the unit definitions.

References

(4)
  1. NIST SP 811 Appendix B.8 conversion factors

    National Institute of Standards and Technology · accessed 2026-11-13

  2. NIST Guide to SI Chapter 4, Table 5 SI prefixes

    National Institute of Standards and Technology · accessed 2026-11-13

  3. NIST Guide to SI Chapter 5, Table 6 liter

    National Institute of Standards and Technology · accessed 2026-11-13

  4. NIST Handbook 44, 2026 edition, Appendix C

    National Institute of Standards and Technology · accessed 2026-11-13