This significant figures calculator counts written digits, rounds a number, and applies precision rules to arithmetic. Keep every written zero so the result reflects the notation you entered.
Which digits count as significant figures?
Nonzero digits count. Zeros between them count too. Leading zeros locate the decimal point; decimal trailing zeros record written precision. A sign or exponent does not add significant figures.
| Written number | Meaningful digits | Count or status | Why |
|---|---|---|---|
| 0.002040 | 2040 | 4 | Leading zeros are placeholders; the internal and final zeros count. |
| 70.607 | 70607 | 5 | Zeros between nonzero digits count. |
| 1.20 | 120 | 3 | A written decimal trailing zero counts. |
| 1300 | 13; terminal zeros unresolved | 2 to 4 significant figures | The notation does not say which terminal zeros are meaningful. |
| 1300. | 1300 | 4 | The explicit decimal point makes the terminal zeros significant. |
| 1.300e3 | 1300 | 4 | Count the coefficient digits; the exponent does not count. |
| 0.00 | No nonzero starting digit | Undefined | No first nonzero digit; the written place is hundredths. |
Langara Chemistry explains the zero and coefficient rules. Ambiguous integers remain unresolved here. For zero, this calculator reports no finite significant count rather than inventing one.
Enter a decimal or E notation without commas or units. Count starts with the first nonzero digit and keeps meaningful trailing zeros. CHEM 1114 – Introduction to Chemistry, 2.3 Measurement Uncertainty, Accuracy, and Precision explains these conventions. An integer with terminal zeros can be ambiguous; choose notation that states the intended precision before using it in Calculate.
Count describes the number as written. Round formats it to the requested significant-digit count. Calculate derives reporting precision from the operands. For representation changes such as decimal, E and engineering notation, the Scientific Notation Calculator shows equivalent forms without treating them as new measurement information.
Rounding significant figures, including ties and carries
Choose Round, enter the number, and set the significant-figure target. The calculator rounds to the nearest value at that precision. At an exact halfway tie, it keeps an even final digit, following NIST Guide to the SI, Appendix B: Conversion Factors. Inspect the whole discarded tail; a nonzero tail beyond halfway must round upward in magnitude.
At 3 significant figures, 1.42500 becomes 1.42, but 1.42501 becomes 1.43. Rounding 9.995 gives 10.0, preserving the requested 3 significant figures after the carry. Significant Figures: Rules for Rounding a Number explains the tie distinction.
A significant-figure target differs from a fixed number of decimal places. Leading zeros do not consume the target. Adding formatted trailing zeros does not create new measurement precision. A terminal decimal point on an integer result preserves ones-place precision. Keep that mark when copying the result.
Significant figures in addition, subtraction, multiplication and division
In Calculate, use +, -, * and / with parentheses when needed. Multiplication and division take precedence over addition and subtraction. Enter compatible quantities; addition and subtraction require the same units, but do not type unit labels into the expression.
Addition and subtraction use the least precise measured decimal place. The expression 12.11 + 18.0 reports 30.1 because the least precise operand ends at tenths. Multiplication and division use the smallest measured significant count. The expression 2.50 * 3.1 reports 7.8 with 2 significant figures. These operation rules are described in CHEM 1114 – Introduction to Chemistry, 2.3 Measurement Uncertainty, Accuracy, and Precision.
Ambiguous integer trailing zeros must be clarified before arithmetic. Use an explicit decimal point or an E coefficient that expresses the intended precision. Division by zero is rejected.
Exact counts and intermediate results
Use exact(number) only when a count or defined value is truly exact. An integer is not automatically exact. In Calculate, 1.20 * exact(2) returns 2.40; the exact factor does not restrict the measured operand's 3 significant figures. When all operands are exact, the result stays a reduced rational: exact(1) / exact(3) returns 1/3. CHEM 1114 – Introduction to Chemistry, 2.3 Measurement Uncertainty, Accuracy, and Precision explains why exact counts do not limit precision.
The calculator keeps intermediate arithmetic exact while tracking the reporting place or significant count after each operation. It rounds the final reported value once. This follows the intermediate-digit principle in Significant Figures: Rules for Rounding a Number, without discarding guard digits along the way. exact() accepts a signed number, not a whole expression.
A mixed calculation with precision tracked
In Calculate, enter (1.0023 + 4.383) * exact(2). Open Working to follow the operands and each operation.
The exact sum is 53853/10000. Addition limits its reporting place to thousandths, giving 4 significant figures for the next operation. Keep the unrounded sum.
Multiplying by the exact factor gives 53853/5000. The factor adds no precision limit, so retain 4 significant figures and round only the final result to 10.77.
What the written digits cannot tell you
Written significant figures cannot establish measurement uncertainty, instrument accuracy or whether an error is acceptable. This calculator does not propagate uncertainty, fit calibration curves, convert units, or evaluate powers and logarithms. The Percent Error Calculator compares an observation with an independently known reference; that discrepancy is a different question from reporting precision.
Zero has no first nonzero digit. Count reports its status rather than assigning a finite significant count, while written decimal places can still identify its reporting place. Round returns zero without manufacturing a measured count. For addition or subtraction, supply a measured zero with its written place. Multiplication or division involving measured zero, or cancellation without a usable significant count, needs a different precision treatment and is rejected here. An explicitly exact zero is allowed except as a divisor. Multiplying a nonzero measured value by exact zero can return a final zero with undefined significant count and reporting place. That result cannot supply automatic precision for a later arithmetic step.
Inputs and expressions have bounded lengths, exponent ranges and arithmetic capacity. Unsupported input is rejected rather than silently treated as zero or infinity. The target range is shown in Round; these are software limits, not scientific definitions.
Frequently asked questions
What is 0.9999 to 3 significant figures?
It rounds to 1.00. The carry reaches the units place, and the trailing zeros preserve 3 significant figures. In Round, enter 0.9999 and set the target to 3. This is greater than the halfway boundary, so it rounds upward under the nearest-rounding rule described by NIST Guide to the SI, Appendix B.