This scientific notation calculator converts a number or calculates with two numbers, then shows scientific, decimal, E and engineering forms with working.
How to convert and normalize scientific notation
Scientific notation writes a value as a coefficient multiplied by a power of ten. Choose Convert for one number, or Calculate to combine two numbers. Open Calculation details to follow the entered sign, decimal places and exponent through the working.
For a nonzero number, the normalized coefficient has magnitude at least 1 and below 10. Keep a negative sign on the coefficient. Moving its decimal point left increases the exponent; moving right decreases it. RMIT Learning Lab: Notation defines the normalization rule.
Use a decimal point and no commas. Decimal input, E or e notation, and a coefficient followed by x, X, × or * and 10^exponent are accepted. For example, 7.25E-3 represents the same value as 0.00725. Use a signed integer exponent. Commas, unit text, fractions, recurring-decimal parentheses and full expressions are not accepted.
Follow a decimal shift step by step
In Convert, enter 0.00725 and leave Display digits on Auto.
Move the decimal point 3 places right to make the coefficient 7.25. Compensate with exponent -3, so the value remains 0.00725 = 7.25 × 10^-3. The E form is 7.25E-3.
For an input already written with a power of ten, adjust its existing exponent. Enter -26 x 10^-4. Moving the coefficient point 1 place left gives -2.6 and raises the exponent from -4 to -3. The result is -2.6 × 10^-3, or -0.0026. The leading minus sign stays with the number.
Compare decimal, scientific, E and engineering notation
Each row shows the same exact value with Display digits set to Auto. E marks a power of ten, not Euler’s number. NIST Guide to the SI, Appendix B explains this notation. Engineering notation uses an exponent divisible by 3, as defined by RMIT Learning Lab: Notation.
| Input | Decimal | Scientific notation | E notation | Engineering notation |
|---|---|---|---|---|
| 1000 | 1000 | 1 × 10^3 | 1E3 | 1 × 10^3 |
| 0.00725 | 0.00725 | 7.25 × 10^-3 | 7.25E-3 | 7.25 × 10^-3 |
| -26 x 10^-4 | -0.0026 | -2.6 × 10^-3 | -2.6E-3 | -2.6 × 10^-3 |
| 0 | 0 | 0 × 10^0 | 0E0 | 0 × 10^0 |
A negative exponent describes a small magnitude; a leading minus sign describes a negative value. Zero uses coefficient 0 and exponent 0 by this calculator’s convention. “Standard form” can mean different things, so the outputs explicitly say Decimal or Scientific notation.
Calculate with numbers in scientific notation
Choose Calculate, enter both numbers and select the operation. Each operand can use any accepted notation. Princeton Astronomy: Scientific Notation describes these rules.
For addition or subtraction, first express both operands with the same exponent. Combine their coefficients, then normalize the result. For multiplication, multiply the coefficients and add the exponents. For division, divide the coefficients and subtract the other operand’s exponent. Division by zero is undefined and rejected.
For example, adding 1e3 and 2e2 aligns them as 10 × 10^2 and 2 × 10^2. Adding the coefficients gives 12 × 10^2, which normalizes to 1.2 × 10^3. Multiplying 2e3 by 4e-2 gives coefficient 8 and exponent 1, returning 8 × 10^1.
Powers, roots and expressions with several operators are outside this tool. The Fraction Calculator accepts fractions, mixed numbers and recurring decimals when those are the values you need to enter. The Ratio Calculator compares or scales quantities as a relationship; scientific notation changes how a single value is written.
Rewriting a coefficient in exponent notation does not solve its equation. The Quadratic Equation Calculator accepts E notation for coefficients and finds the roots with working.
Read exact values, rounded results and limits
In Convert, Auto preserves the exact finite input. In Calculate, Auto also preserves terminating results exactly. A recurring quotient uses 12 significant display digits and keeps the reduced exact fraction in Calculation details. In Calculate, enter 1 and 3 and choose Divide. The scientific display is ≈ 3.33333333333 × 10^-1; the decimal is ≈ 0.333333333333, while the exact fraction remains 1/3.
Both modes offer Display digits from 1 to 100 under More options. This rounds the display to the chosen significant-digit count, with ties to even, following the rule in NIST Guide to the SI, Appendix B. It does not round the exact internal value. Scientific, decimal, E and engineering outputs all describe that same displayed value. An approximation mark appears only when rounding changes the value. Copy retains the accuracy note and exact fraction when needed.
Trailing zeros are not padded to imply measurement precision. Changing notation does not establish significant figures, convert units or estimate measurement uncertainty. A tiny supported nonzero value stays nonzero.
Each input permits 256 characters and 100 coefficient digits, including leading zeros. A typed exponent must lie from -1000 to 1000 and contain at most 4 digits, excluding its sign. The exact reduced numerator and denominator each have a 2202-digit capacity. These are Calculator Campus resource limits. A result’s exponent may extend beyond the typed-input range; unsupported inputs are rejected rather than silently rounded or turned into zero.
To count the meaningful digits of a measured value, preserve its written zeros in the Significant Figures Calculator. It also rounds to a chosen significant count and applies reporting-precision rules to arithmetic; changing notation alone does not establish that precision.