Skip to main content

Temperature Converter

Use this temperature converter to convert a reading or a known temperature change between Celsius, Fahrenheit, kelvin and Rankine. Enter the value, choose its scale and select the scale you need. Choose Known temperature change only when the value describes a rise or fall.

Temperature conversion formulas

This temperature converter applies both a scale factor and an offset to readings. Celsius and kelvin have equal-sized steps, as do Fahrenheit and Rankine. Kelvin and Rankine start at absolute zero. Use K for kelvin, without a degree sign; the other symbols are , and .

Celsius and Fahrenheit

F = C × 9/5 + 32. In reverse, C = (F − 32) × 5/9. Here C and F mean the numeric readings in and . The factors and offsets are exact. NIST conversion factors.

Kelvin and Rankine

K = C + 273.15; C = K − 273.15. R = K × 9/5; K = R × 5/9. R = F + 459.67; F = R − 459.67. These equations connect every scale pair. To go from to K, use K = (F + 459.67) × 5/9; in reverse, F = K × 9/5 − 459.67. R is the numeric reading in . NIST temperature conversion equations.

Celsius to Fahrenheit worked example

Enter 20 in Temperature reading mode and choose Fahrenheit. The result is 68 .

Using the Celsius-to-Fahrenheit formula, 20 × 9/5 + 32 = 68. The equivalent readings are 293.15 and 527.67 .

Convert a known temperature change

A temperature change describes a rise or fall, not a position on a scale. Choose Known temperature change and enter the signed change you already know. A negative value means cooling. This mode does not subtract a starting reading from an ending reading.

Offsets cancel when readings are subtracted. Multiply a Celsius or kelvin change by 9/5 to get a Fahrenheit or Rankine change; to convert the other way, multiply by 5/9. A Celsius change has the same numeric value in kelvin, and a Fahrenheit change has the same numeric value in Rankine. NIST interval definitions.

For a change of −10 , the calculator returns -18 Δ (change). Entering −10 as a reading instead returns 14 (reading). The mode changes the meaning of the input, so check it before using the answer.

Temperature conversion reference table

These are equivalent readings, not temperature changes. The first row is absolute zero; the remaining rows are numeric examples.

CelsiusFahrenheitKelvinRankine
-273.15 -459.67 0 0
-40 -40 233.15 419.67
0 32 273.15 491.67
20 68 293.15 527.67
100 212 373.15 671.67

All cells use the same conversion engine as the calculator. No row is a medical threshold or an oven recommendation.

Temperature limits and rounding

Reading mode includes absolute zero and rejects lower readings. The limits are -273.15 , -459.67 , 0 , 0 . Signed changes have no absolute-zero lower bound because they describe a difference. NIST temperature definitions.

Both modes calculate from the entered decimal value with exact scale factors and offsets. Results normally show up to 6 decimal places, with trailing zeros removed. The ≈ mark means the displayed value was rounded. Tiny nonzero results that would round to zero use scientific notation with up to 12 significant digits; values with magnitude at least 1e21 use that notation too. The same presentation applies to equivalent values, calculation details and copied results. More displayed digits do not make the original measurement more accurate.

Changing the source and target scales reverses the conversion rule. Use the original input for further calculations rather than a rounded displayed result. Values outside the supported numeric range produce an error.

Converting an oven temperature changes its scale only. It does not adjust for a fan oven, choose a gas mark or change cooking time. A converted body-temperature reading does not diagnose illness.

References

(3)
  1. SI Units - Temperature

    National Institute of Standards and Technology · accessed 2026-11-13

  2. NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically

    National Institute of Standards and Technology · accessed 2026-11-13

  3. NIST Guide to the SI, Chapter 8: Comments on Some Quantities and Their Units

    National Institute of Standards and Technology · accessed 2026-11-13