Skip to main content

Surface Area Calculator

Surface area calculator for the boundary of an ideal solid. Choose the shape, enter its dimensions and select the faces to include. Results use square units.

Identify the solid and its dimensions

Start with the solid that matches your object. Radius runs from the center to the circular edge; diameter runs all the way across. Height is perpendicular to the base unless you explicitly select slant height.

Area, volume or perimeter?

Surface area measures the combined boundary of a solid. Volume measures enclosed space, and perimeter measures the distance around a flat boundary. For a floor, wall or single flat face, the Square Footage Calculator measures planar coverage without adding the other faces of a solid.

Check the measurement labels

For a cone, slant height runs along the curved side. For a square pyramid, face slant height runs from the apex to the midpoint of a base edge, not to a corner. Capsule length is only the straight cylindrical section. A spherical cap needs the parent sphere radius and the cap height, not the radius of the cut circle.

Use length units for inputs and square units for area

Choose the unit beside each dimension. Mixed input units are normalized separately before the formula runs. The output selector changes the unit of the computed area; it does not change which surfaces are counted. Squaring a length conversion factor gives the corresponding area factor. The customary units use international definitions, including the international foot, as documented by NIST conversion factors; metric dimensions use SI prefixes.

If you already know an area and only need a different square unit, the Area Converter converts that measurement without requiring a solid or its dimensions.

Every shape displays up to 12 significant digits with nearest rounding. Calculations retain available precision until display; copied results use the same presentation. Scientific notation keeps very small nonzero areas visible. More digits do not improve the accuracy of your measurements.

Uniform enlargement changes area by the square of the length scale factor. If every dimension is multiplied by k, each area formula gains a factor of k². Keep the same shape and counted faces for this comparison. This follows by substituting the scaled dimensions into the formulas below.

Choose total, lateral or open surface area

Total includes all the closing flat faces of the selected solid. Lateral or curved area excludes those faces. Open top keeps the side surfaces and bottom while omitting the top face. It is available for a cylinder, rectangular prism, cube and conical frustum. For a frustum, Open top removes the smaller top disk. A container open at its wider end is outside this mode. For that shape, use Lateral and add the smaller base disk separately. The result details state which faces are included.

An open-top cylinder here is an ideal boundary. The calculator does not double its wall area to represent the inside and outside of a physical sheet. Tube mode has separate inner and outer radii: its total includes both walls and both annular ends. Its lateral result includes both walls but omits the annuli. A hemisphere's total includes its flat disk; curved-only omits that disk. Sphere, capsule and ring torus use total area only.

For a capsule, the joining circles between the cylinder and rounded ends are internal and do not count. For a prism or pyramid, measure the height or length at right angles to the base. These face sums follow AMSI surface-area derivations; the tube combines cylinder walls with differences of circular areas.

Check a cylinder with and without its top

Enter radius 3 and height 4 , with square meters as the output unit. Keep the radius measurement selected. The cylinder formula combines the wall and circular ends.

For the closed cylinder, A = 2 × π × 3 × 4 + 2 × π × 3² ≈ 131.946891451 . Both ends are included.

Select lateral to omit both ends: A = 2 × π × 3 × 4 ≈ 75.3982236862 . Select open top to keep the bottom: A = 2 × π × 3 × 4 + π × 3² ≈ 103.672557568 . The dimensions stay the same; only the counted faces change.

Surface area formulas by solid

The total column includes all closing faces. The lateral or curved column omits them; total-only shapes have no separate face selection. Use consistent length units within each formula. π is the circle constant. The elementary face sums follow AMSI. The shape-specific references below establish the curved-area identities.

SolidTotal area formulaLateral or curved areaDimensionsIncluded surfaces
Cylinder2πrh + 2πr²2πrhr is radius; h is perpendicular heightCurved wall and both circular ends
Rectangular prism2h(l + w) + 2lw2h(l + w)l is length; w is width; h is heightAll rectangular faces
Cube6a²4a²a is edge lengthAll square faces
Sphere4πr²Total onlyr is sphere radiusEntire curved boundary
Coneπrs + πr²; s = √(r² + h²)πrsr is radius; h is perpendicular height; s is slant heightCurved side and circular base
Hemisphere3πr²2πr²r is sphere radiusCurved half-sphere and closing disk
Triangular prism(a + b + c)l + 2B(a + b + c)la, b, c are base sides; l is prism length; B is triangle areaSide rectangles and both triangular ends
Square pyramid2as + a²; s = √(h² + (a/2)²)2asa is base side; h is perpendicular height; s is face slantTriangular sides and square base
Conical frustumπ(R + r)s + π(R² + r²); s = √((R − r)² + h²)π(R + r)sR is bottom radius; r is top radius; h is perpendicular heightCurved side and both end disks
Tube2π(R + r)h + 2π(R − r)(R + r)2π(R + r)hR is outer radius; r is inner radius; h is lengthInner wall, outer wall and both annular ends
Capsule2πrl + 4πr²Total onlyr is radius; l is straight body lengthCylinder wall and rounded ends
Spherical cap2πRh + πh(2R − h)2πRhR is parent sphere radius; h is cap heightCurved cap and closing disk
Ring torus4π²RrTotal onlyR reaches the tube centerline; r is tube radiusEntire curved boundary

For the triangular base, B = √(p(p − a)(p − b)(p − c)), where p = (a + b + c)/2, from Heron's formula. Cone and pyramid s is face slant height. The cone, pyramid, frustum, spherical cap and ring torus references give the corresponding identities. Cube, hemisphere, tube and capsule rows combine the elementary faces described above.

Where the ideal-solid model applies

Use the dimensions of a named ideal solid with straight edges, circular sections and right angles where the formula requires them. Triangular base sides must form a nondegenerate triangle. A tube needs an inner radius smaller than its outer radius; a ring torus needs a major radius larger than its tube radius. Cap height cannot exceed the parent sphere diameter. A frustum requires the top radius to be no larger than the bottom radius. It may have equal end radii or a zero top radius, and a capsule may have zero straight length. Other active dimensions must be positive.

These formulas do not infer the area of an irregular object or mesh, an oblique solid, an ellipsoid or a composite object. They do not estimate paint, material thickness, waste, heat transfer, pressure or body surface area. A curved-only hemisphere is not a thick hemispherical shell. To measure enclosed geometric space instead, use the Volume Calculator.

Frequently asked questions

What is the surface area of a cuboid with 6cm, 4cm, and 5cm?

Choose Rectangular prism with length 6 , width 4 and height 5 , then select total surface area. Under More options, set Area unit to cm². The answer is 148 , equivalent to 0.0148 in the default area unit. The calculation adds the areas of each pair of opposite faces: 2 × (6 × 4 + 6 × 5 + 4 × 5). This follows the cuboid surface-area formula.

Why is the surface area of a sphere 4πr²?

Divide the sphere into thin horizontal bands. Writing its radius as r, the area element given by MathWorld is dA = r² sin(v) du dv, where u goes around the sphere and v is the angle from the pole. Summing around u gives dA = 2πr² sin(v) dv. The band height has magnitude |dz| = r sin(v) dv, so dA = 2πr |dz|. The bands span a total height of 2r, giving 2πr × 2r = 4πr². This is our derivation from the cited area element. It also explains why the sphere has the same area as the curved wall of a cylinder of radius r and height 2r, excluding its end disks.

References

(12)
  1. AMSI TIMES, Area, volume and surface area

    Australian Mathematical Sciences Institute · accessed 2026-11-14

  2. NIST SP 811 Appendix B.9, length and area

    National Institute of Standards and Technology · accessed 2026-11-14

  3. NIST SI prefixes

    National Institute of Standards and Technology · accessed 2026-11-14

  4. MathWorld Cuboid

    Wolfram MathWorld · accessed 2026-11-14

  5. MathWorld Cylinder

    Wolfram MathWorld · accessed 2026-11-14

  6. MathWorld Sphere

    Wolfram MathWorld · accessed 2026-11-14

  7. MathWorld Cone

    Wolfram MathWorld · accessed 2026-11-14

  8. MathWorld Pyramid

    Wolfram MathWorld · accessed 2026-11-14

  9. MathWorld Conical Frustum

    Wolfram MathWorld · accessed 2026-11-14

  10. MathWorld Heron's Formula

    Wolfram MathWorld · accessed 2026-11-14

  11. MathWorld Spherical Cap

    Wolfram MathWorld · accessed 2026-11-14

  12. MathWorld Torus

    Wolfram MathWorld · accessed 2026-11-14