Use this square root curve calculator to adjust an assessment percentage, convert earned points, work backward from a target, or curve a list of scores. It applies a grading formula; it does not plot a square-root graph or fit a trendline.
How to calculate a square root curved grade
Start with the original assessment score and apply the square-root adjustment once. Choose percentage entry when the raw percentage is known, or points entry when you have earned and possible points. Reverse finds the raw score for a target; the list mode applies the same rule to each score.
For a raw percentage p, the curved percentage is c = 10 × √p. The North Carolina teaching resource describes this method, and Making the Grade gives the same transform. For points, first calculate p = 100 × earned ÷ possible, then calculate equivalent curved points = possible × c ÷ 100. The increase in is c − p. A raw 64 becomes 80, an increase of 16 .
Enter a raw percentage from 0 to 100. A zero score is valid; a blank field is missing information. Points earned must be nonnegative and no greater than points possible. The possible total must be greater than zero and at most 1,000,000 . Use ordinary decimals with at most 6 decimal places, without signs or thousands separators.
Rearranging the same formula gives raw percentage = target² ÷ 100. A target of 85 requires 72.25 raw. With a points total, required raw points = possible × required raw percentage ÷ 100. For a target of 80 on an assessment worth 45 , this gives 64 raw, or 28.8 . Leave points possible blank for a percentage-only answer. Reverse targets show exact decimal results for the entered values. These are continuous results; the tool does not round up to an attainable whole-question score.
Worked example with earned and possible points
- Suppose you earned 18 out of 25 .
- The raw percentage is 18 ÷ 25 × 100 = 72.
- Apply the curve: 10 × √72 ≈ 84.85.
- The equivalent score is 25 × curved percentage ÷ 100 ≈ 21.21 .
- The increase is about 12.85 .
- Each result uses the unrounded calculation; the displayed percentage is not reused to calculate points.
Square root curve chart
Read across from the original percentage to the curved percentage and the absolute increase. The chart uses the same engine as the calculator. Enter your exact score above when it falls between the listed values; the formula is nonlinear, so interpolating between rows can change the answer.
| Raw percentage | Curved percentage | Increase in |
|---|---|---|
| 0.00 | 0.00 | 0.00 |
| 10.00 | 31.62 | 21.62 |
| 20.00 | 44.72 | 24.72 |
| 25.00 | 50.00 | 25.00 |
| 30.00 | 54.77 | 24.77 |
| 40.00 | 63.25 | 23.25 |
| 50.00 | 70.71 | 20.71 |
| 60.00 | 77.46 | 17.46 |
| 70.00 | 83.67 | 13.67 |
| 80.00 | 89.44 | 9.44 |
| 90.00 | 94.87 | 4.87 |
| 100.00 | 100.00 | 0.00 |
Values are rounded for display. These sample scores are lookup points, not letter-grade boundaries.
Why the percentage-point increase varies
The increase depends on the starting score. The largest absolute increase is 25 , at a raw score of 25, which becomes 50. Scores of 0 and 100 stay unchanged. A smaller positive starting score has a larger proportional gain, but it does not always gain more . Relative gain is undefined for a zero starting score because it would require division by zero.
The formula is strictly increasing, so higher raw scores remain higher before rounding. Display rounding can make close scores look tied. For example, raw scores of 64 and 64.000001 both display as 80.00 after the curve, although their unrounded results differ. A displayed tie is not an exact tie.
Curve a list of percentages or points
Select the list task and choose percentages or points. Separate up to 200 scores with commas or newlines. Use one shared possible-points total for a points list. Do not include headers, signs, thousands separators or empty items. An invalid score rejects the entire list and identifies its row; fix it before copying results. Order, duplicates and zero scores are preserved.
The percentage list 0, 25, 64, 100 becomes 0.00, 50.00, 80.00, 100.00. A points list of 18, 0, 18, 25 out of 25 becomes 21.21, 0.00, 21.21, 25.00 equivalent points. Each score is transformed separately. Curving the class mean is not a substitute for averaging the individually curved scores.
Copy results to paste a tab-separated table into a spreadsheet. The copied values retain full numeric precision, while forward result tiles and tables use 2 decimal places. Open the calculation details to see the input substitutions before display rounding. If clipboard access fails, select and copy the fallback text. No class distribution or student names are needed.
Check the grading policy before using the result
Confirm that the teacher uses this specific formula and whether it applies to individual assessments. A linear adjustment changes scores by a straight-line rule; a bell-curve policy uses a class distribution. Applying a square-root adjustment again creates a different result. This calculator applies it once and does not accept negative scores or extra-credit scores above 100.
The transform does not establish letter grades, passing thresholds, fairness or official AP score conversions. The cited sources document a method, not your school's policy. Check how the school rounds and what point increments are attainable before treating a reverse result as a minimum score.
If you first need an uncurved score from correct answers, the Quiz Grade Calculator handles that step. To combine the accepted assessment scores with course weights, continue with the Grade Calculator. The Semester Grade Calculator combines grading periods and exams; the Final Grade Calculator solves a weighted course target. Those calculations answer different questions from curving one assessment.