Plywood Weight Calculator

Start with the nominal thickness printed on the sheet, then switch to actual thickness only when you have a measured caliper value.

Choose the closest product family. Density is the largest driver of the weight estimate.
Enter the long panel dimension in inches. A standard 8 ft sheet is 96 in.
Enter the short panel dimension in inches. A standard 4 ft sheet is 48 in.
Use nominal for the size printed on the panel stamp; use actual when you measured the sheet.
The calculator maps this label to the APA actual equivalent before computing weight.
Measured panel thickness in inches, used only in actual-thickness mode.
Enter 1 for a single panel or the sheet count in a stack or pallet.
Advanced options
The math always uses the same dimensions and density, then converts the displayed result.
Total weight 67.08 lb
Weight per sheet 67.08 lb
Surface weight density 2.096 lb/ft²
Actual thickness used 0.7188 in
Show calculation details
Density used 35.0 lb/ft³
Total weight (kg) 30.43 kg
Weight per sheet (kg) 30.43 kg
Surface density (kg/m²) 10.24 kg/m²