Freight Linear Feet Calculator

Start with the standard identical-pallet flow. Switch modes only when you need mixed pallet sizes or a density-based freight-class estimate.

Calculation mode

Standard estimates one identical pallet size. Mixed Pallet Sizes lets you enter several L × W × H × count rows. Freight Class / Density adds shipment weight and an estimated NMFC class.

Choose inches or centimeters for every pallet dimension you enter.
Total identical pallets in the shipment.
Front-to-back loaded pallet length that consumes trailer floor.
Side-to-side loaded pallet width. Widths of 48 inches or less can count two across.
Choose how many pallets can safely stack vertically before floor rows are counted.
For mixed mode, enter each type as LxWxHxCount, separated by semicolons.
Shipment weight used to compute density and the density-based NMFC class estimate.
Advanced options
Trailer 53 ft dry van Notes Standard 96-inch trailer-width pinwheel rule applied.
Loaded pallet height. It is needed for density mode and included in mixed pallet rows.
Kilograms are converted to pounds before density is calculated.
Use this to document the equipment you are planning around; the core pinwheel rule uses a 96-inch trailer interior.
Linear feet 20 ft
10 LF rule Yes — 10 LF or more
Total pallets 10 pallets
Show calculation details
Trailer rows 5 rows
Trailer type 53 ft dry van
Notes Standard 96-inch trailer-width pinwheel rule applied.